How To Keep Your Lawn Green – Electric Chain Saw 2020

They say the grass is always greener on the other side. That’s not necessarily true, because if you follow a few basic lawn care rules then that lush, emerald splendor will be on YOUR side.

We tend to think of grass as a fairly tough and resilient plant that can take a few hard knocks and always bounce back. Essentially it is a hardy growth and will stand up to a surprising degree of abuse and still survive. But bare survival can leave a lawn looking tired and in need of some tender, loving care. Why wait until it reaches that state when a little ongoing effort will maintain your lawn in tip-top condition?

Mowing The Lawn; The One Third Rule

For many people cutting grass is an onerous and boring task and so they have a tendency to make sure they don’t have to do it too often. To accomplish this they cut it short so that it’s a while before it needs to be trimmed again. Big mistake. The single biggest cause of a discolored lawn is the scalping effect of cutting too short. Grass gets traumatized by being trimmed of most of its length. Additionally, this can expose the roots to the sun, which will dehydrate and brown them.

Remember the one-third rule. Whenever you mow the lawn, never remove more than a third of the total grass blade height. Do you know that low cut setting on your lawnmower? Ignore its existence. A low cut will allow weeds access to the sun, giving them a chance to germinate, it will also make your grass struggle for existence, leaving it looking exhausted. A higher cut leaves plenty of the plant available to perform photosynthesis, taking nutrients from the sunlight. It also helps to conserve moisture in the lawn. Additionally, remember to sharpen your mower’s blades at least once a year, to provide a clean and non-shredding trim.

The Thatch Effect

Dead grass and weeds which lay at the base of your grass blades can make it very difficult for water to penetrate effectively, making the soil sterile. You can remove this thatch by scarifying the lawn. If you have a large area of grass to contend with it could be worthwhile investing in a powered scarifying device kind of like a lawnmower. Otherwise, you just need to use a spring-tine rake and drag up the thatch by hand. This action will help green your lawn by allowing water and its nutrients to get to the grassroots. You might also consider aeration. This involves removing small, cylindrical plugs of soil and backfilling the holes with sharp sand.

Adding Nutrients

A tired-looking lawn can be given a boost by the application of fertilizer in the Spring. This should ideally have more phosphates than nitrogen, as the latter will indeed make your grass greener in the short term but it also encourages top growth. After applying fertilizer, water the lawn so that the nitrogen doesn’t scorch the grass.

During the Summer months, the grass grows more rapidly and so uses up nutrients at a swifter rate, so it‘s also a good idea to fertilize in the Autumn, too, when the soil is becoming drained of nutrients. At this time you should also re-seed using a spreader for even distribution. This makes your lawn thicker, which helps to crowd out weeds, but a thicker lawn also has another advantage. It looks lusher and, yes, greener.

A Parting Shot

Do you own a dog? It’s worth remembering that dog urine can cause brown patches on your lawn caused by an excess of salt. Dilute this with plenty of water and then maybe train your pet to go elsewhere.

Electric Chainsaw Maintenance Tips for Better Operation and Longer Useful Life

You will definitely benefit greatly from a set of practical electric chainsaw maintenance tips if you are using such a tool extensively. It is indispensable when it comes to felling trees, cutting branches and making the most out of vegetation brought down by storms. With proper maintenance, your tool will operate effectively for years to come. You will not have to worry about breakdowns and damages which may be expensive to fix.

Basics

We all think that we are perfectly aware of the most basic electric chainsaw maintenance tips for the best electric chainsaw, but we are usually wrong. Firstly, you need to take the appropriate safety measures every time you plan to clean and maintain the tool. The most important thing is for the unit to be disconnected from the electric grid. You should also use garden gloves or similar ones which will protect your hands from accidental cuts. It is best for you to put on safety glasses as well. The risk is low, but wood splints can still find their way into your eyes during the maintenance of the tool.

The next most important basic tip is to follow the manufacturer’s instructions and guidelines when maintaining your electric chainsaw. Take time to read the owner’s manual and adhere to it when performing any kind of maintenance task. This will not only prevent you from breaching the warranty on the tool but will also ensure that your actions will not lead to problems.

Chain Maintenance

The chain is the part that is subject to the greatest wear and tear so it requires the most attention. There are two main goals for chain maintenance. The chain has to have perfect tension. It must be sufficiently sharp at all times. Use the following electric chainsaw maintenance tips to meet these goals.

You need to inspect the chain for sagging before each use of the tool. You need to tighten it immediately if you notice such a problem. If you do not take action, you risk having the chain come out of the guide bar and cause a serious injury.

In order to tighten the chain, you need to loosen the bar clamps on the unit first. That way, you will be able to move the guide bar freely for the job to be done. The next step is to find the chain adjustment screw. It should be clearly visible. Depending on the model, you need to turn the screw clockwise or counterclockwise in order to reposition the guide bar so that the chain is tight enough. Keep in mind that the chain should not be too tight either.

In order to find out when the blades of the chain need sharpening, you need to monitor the waste material produced during the operation of the tool. This is one of the most important electric chainsaw maintenance tips. If the tool is producing shavings, then it is working properly. If it is producing nothing but dust, then it is time for the blades to be sharpened.

If you decide to go for DIY blade sharpening, you must buy the appropriate tools and use the technique recommended by the manufacturer. If you do not have the required skills and some experience, it is best to have the blades professionally sharpened.

Guide Bar Maintenance

The chain runs around the guide bar so this is another major component that needs to be taken good care of with the help of the appropriate electric chainsaw maintenance tips. The first thing which the guide bar needs are appropriate cleaning from dust and shavings. It is best to use a putty knife to remove the dirt which has got accumulated in the tight areas of the bar.

The guide bar’s groove will suffer from burring as you keep using the tool. This is a normal thing that occurs due to the friction heat producing during the operation of the unit. You simply need to file the burrs using an appropriate tool for the purpose.

Check the sprocket holes on the guide bar on a regular and make sure that they are lubricated. If lubrication is required, you need to use a product recommended by the manufacturer. Follow the owner’s manual instructions for this maintenance task.

Use these electric chainsaw maintenance tips to ensure that you will be able to make the most out of the investment that you have made.

Electric Chain Saw Buyers Guide – Chose Right Chain Saw

How to Choose Best Electric Chainsaw-Buyers Guide

The choice of chainsaw depends on your work i.e need it for light-duty or for heavy-duty. Previously gas-powered chainsaws were used but now a days World has switched towards electric power tools because they have additional features like

  1. They are far Quieter
  2. Requires less maintenance
  3. Do not need Gasoline(saves money)
  4. Easy to start and use

Most people only focus on those parameters they know well like power, bar length, etc. But there are many more features that you should keep in mind before buying because they will be very helpful in selecting your best electric chainsaw. These are described below.

Corded VS Cordless Chainsaws

Corded Chainsaw

As the name indicates these chainsaws need a power cord for its working and are cheaper. They have a power cable that needs an extension cord for working. These are more powerful than cordless versions and delivers different power outputs ranging between 8-14.5 Amp and their extension cord gives you a maximum length of 100 feet. They are also lubricating that reduces wear and tear,

The only downside is its limited access. Because it allows you to work within a limited area or in other words you need several extension cords for doing different jobs.

Cordless Chainsaw

These gain their power from a battery and are a bit expensive. These electric chainsaws allow freedom of movement. But these are considered less powerful than corded versions. Its power output is measured between 24-82 Volts.

Power and Speed

Make sure to buy the chainsaw that suits your work. If you are a household and want it for personal use then only buy a chainsaw that has less power and save your money. But, if you are a professional then spend on your tools and buy the best with high power.

Shortly, power or speed depends on the type of work you perform. It is important to note that the power of chainsaw is advertised as Amperage and Voltage. Corded versions power range between 8-14.5 Amp while cordless have 24-82 Volts.

Bar Length

The guide bar is a log-shaped protrusion that houses your chain. Generally, its length ranges between 6-32 inched(15-81cm). The length of a bar is linked directly with the length of wood that you cut in one pass. For example, if you have a 6-inch bar and the piece of wood needs to cut is 12 inches then do not worry, you can easily cut it into two passes.

Do not invest your money on heavy electric chainsaw if you are not a professional. Just use your energy and perform cutting multiple times. But if you are a professional and have a forest for cutting then go with the electric chainsaw with large bar length.

For your ease, we have created a guide bar length and required task table

Guide Bar Length Tasks
14″(35cm) or belowSmall jobs(trimming)
12-14″(30-35cm)Removing limbs and cutting down small trees
16″(40cm)Cutting Firewood
Cutting down medium trees

The following are the six teams that have qualified through the qualifier tournament and will play alongside Bangladesh and Sri Lanka for the four spots of the super 12s.

Always go for the budget-friendly purchase. This will not only save your time but reduces your anxiety about buying too.
Budget

Anti-Vibration

Most of the electronic chainsaws vibrate as they are powerful and disturb the operator’s mood and work. You need a chainsaw that has anti vibrating features. This will help you a lot with good finished cuts.

Kick-Back Reduction

You must be familiar with kickback as it results in a lot of serious injuries. Features like a chain link help reduce the risk of kick-back.

Chain Brake

It is also a mandatory safety feature with no compromise. Chain brake also reduces the risk of unexpected accidents may be due to cause of kick-back.

If something serious is going to happen, automatically chain brake stops the chain and protects the operator.

Chain catcher

It is an additional safety feature in case if the guide bar comes off, it stops the chain from flying.

Auto-Lubrication

Chain and bar need oil for lubrication. The Auto-oiling system itself lubricates with the oil when needed. These chainsaws have windows through which oil level can be checked.

Tool-Free Adjustment

If you have used a chain saw before then you should understand the headache of adjusting tools manually. Tool-free adjustment needs easy to turn the knob and that’s it.

Comfortable Handle

The whole weight of chainsaw rest on your hands during working. If your chainsaw has a comfortable handle then it will reduce hand fatigue of operator when in prolonged use. Handles are designed and wrapped with rubber for increased convenience.

Case

It is not mandatory equipment, but if you have it then it will protect your electric chainsaw from damage and injury during transport.